| Shipment Reliability and Frequency | Volume of Goods |
|---|---|
| Avg. Shipments per Month: 22.75 | Average TEU per month: 28.18 |
| Active Months: 12 | Average TEU per Shipment: 1.24 |
| Shipment Frequency Std. Dev.: 13.06 |
| HS Code | Shipments |
|---|---|
| 903190 Instruments, appliances and machines; parts and accessories for those measuring or checking devices of heading no. 9031 | 313 shipments |
| 903180 Instruments, appliances and machines; for measuring or checking n.e.c. in chapter 90 | 193 shipments |
| 847989 Machines and mechanical appliances; having individual functions, n.e.c. or included in this chapter | 168 shipments |
| 392690 Plastics; other articles n.e.c. in chapter 39 | 56 shipments |
| 732690 Iron or steel; articles n.e.c. in heading 7326 | 29 shipments |
| 847990 Machines and mechanical appliances; parts, of those having individual functions | 24 shipments |
| 550320.0 Synthetic staple fibres, not carded, combed or otherwise processed for spinning | 21 shipments |
| 841231 Engines; pneumatic power engines and motors, linear acting (cylinders) | 19 shipments |
| 722020 Steel, stainless; flat-rolled, width less than 600mm, cold-rolled | 17 shipments |
| 850450 Electrical inductors; n.e.c. in heading no. 8504 | 17 shipments |
| 902212 Apparatus based on the use of x-rays; including radiography or radiotherapy apparatus, whether or not for medical, surgical, dental or veterinary uses, computed tomography apparatus | 17 shipments |
| 520300.0 Cotton, carded or combed | 16 shipments |
| 761699 Aluminium; articles n.e.c. in heading 7616 | 13 shipments |
| 420212 Cases and containers; trunks, suit-cases, vanity-cases, executive-cases, brief-cases, school satchels and similar containers, with outer surface of plastics or of textile materials | 12 shipments |
| 760421 Aluminium; alloys, hollow profiles | 11 shipments |
| 853890 Electrical apparatus; parts suitable for use solely or principally with the apparatus of heading no. 8535, 8536 or 8537 | 11 shipments |
| 400811 Rubber; vulcanised (other than hard rubber), in plates, sheets and strip of cellular rubber | 8 shipments |
| 731815 Iron or steel; threaded screws and bolts n.e.c. in item no. 7318.1, whether or not with their nuts or washers | 8 shipments |
| 848330 Bearing housings, not incorporating ball or roller bearings and plain shaft bearings | 8 shipments |
| 850240.0 Electric generating sets and rotary converters | 8 shipments |
| 441510 Wood; cases, boxes, crates, drums, similar packings and cable-drums | 7 shipments |
| 550320 Fibres; synthetic staple fibres, of polyesters, not carded, combed or otherwise processed for spinning | 7 shipments |
| 846694.0 Parts & accessories suited for use only/mainly with machines of headings 8456-8465, including work/tool holders, self-opening dieheads, dividing heads & other special attachments for the machines; tool holders for any type of tool for working in the hand | 7 shipments |
| 848120 Valves; for oleohydraulic or pneumatic transmissions | 7 shipments |
| 848210 Ball bearings | 7 shipments |
| 850131 Electric motors and generators; DC, of an output not exceeding 750W | 7 shipments |
| 731829 Iron or steel; non-threaded articles, n.e.c. in item no. 7318.2 | 6 shipments |
| 903149 Optical instruments and appliances; for measuring or checking, n.e.c. in chapter 90 | 6 shipments |
| 902230.0 X-ray, alpha, beta, gamma radiation apparatus; x-ray tubes, x-ray generators, high tension generators, control panels and desks, screens, examination or treatment tables, chairs and the like | 5 shipments |
| 392220 Plastics; lavatory seats and covers | 4 shipments |
| 441520 Wood; pallets, box pallets and other load boards; pallet collars | 4 shipments |
| 700719 Glass; safety glass, toughened (tempered), (not of a size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels) | 4 shipments |
| 721691 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products | 4 shipments |
| 732090 Iron or steel; springs n.e.c. in heading no. 7320 | 4 shipments |
| 848310 Transmission shafts (including cam shafts and crank shafts) and cranks | 4 shipments |
| 853710 Boards, panels, consoles, desks and other bases; for electric control or the distribution of electricity, (other than switching apparatus of heading no. 8517), for a voltage not exceeding 1000 volts | 4 shipments |
| 854442 Insulated electric conductors; for a voltage not exceeding 1000 volts, fitted with connectors | 4 shipments |
| 870850 Vehicle parts; drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof | 4 shipments |
| 870850.0 Motor vehicles; parts and accessories, of heading no. 8701 to 8705 | 4 shipments |
| 390110 Ethylene polymers; in primary forms, polyethylene having a specific gravity of less than 0.94 | 3 shipments |
| 760429 Aluminium; alloys, bars, rods and profiles, other than hollow | 3 shipments |
| 761090 Aluminium; structures (excluding prefabricated buildings of heading no. 9406) and parts of structures, n.e.c. in heading no. 7610, plates, rods, profiles, tubes and the like | 3 shipments |
| 848350 Pulleys and flywheels, including pulley blocks | 3 shipments |
| 848790 Machinery parts; not containing electrical connectors, insulators, coils, contacts or other electrical features, n.e.c. in chapter 84, other than ships' or boats' propellers and blades therefor | 3 shipments |
| 850240 Electric rotary converters | 3 shipments |
| 902519 Thermometers and pyrometers; (other than liquid filled, for direct reading), not combined with other instruments | 3 shipments |
| 903149.0 Measuring or checking instruments, appliances and machines, n.e.c. or included in this chapter; profile projectors | 3 shipments |
| 391990 Plastics; plates, sheets, film, foil, tape, strip, other flat shapes thereof, self-adhesive, other than in rolls of a width not exceeding 20cm | 2 shipments |
| 392119 Plastics; plates, sheets, film, foil and strip, of plastics n.e.c. in heading no. 3921, cellular | 2 shipments |
| 392390 Plastics; articles for the conveyance or packing of goods n.e.c. in heading no. 3923 | 2 shipments |
| 490191 Printed matter; dictionaries, encyclopaedias and serial instalments thereof | 2 shipments |
| 560490 Yarn; textile yarn, strip, and the like of heading no. 5404 or 5405, impregnated, coated, covered, or sheathed with rubber or plastics, n.e.c. in heading no. 5604 | 2 shipments |
| 680293 Granite; articles thereof, (other than simply cut or sawn, with a flat or even surface) | 2 shipments |
| 681510 Stone articles and articles of other mineral substances; non-electrical articles of graphite or other carbon | 2 shipments |
| 681513 Stone or other mineral substances; articles thereof (including articles of peat), n.e.c. or included | 2 shipments |
| 700719.0 Safety glass, consisting of toughened (tempered) or laminated glass | 2 shipments |
| 731814 Iron or steel; threaded self-tapping screws | 2 shipments |
| 741521 Copper; washers, (including spring washers), not threaded | 2 shipments |
| 842890 Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426, 8427 or 8428 | 2 shipments |
| 844711.0 Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting | 2 shipments |
| 846620 Parts & accessories suited for use solely/principally with machines of headings 8456-8465; work holders | 2 shipments |
| 846694 Machine-tools; parts and accessories, for the machines of heading no. 8462 or 8463, n.e.c. in heading no. 8466 | 2 shipments |
| 847141 Automatic data processing machines; comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined, n.e.c. in item no. 8471.30 | 2 shipments |
| 847981 Machines and mechanical appliances; for treating metal, including electric wire coil-winders | 2 shipments |
| 851822.0 Microphones and their stands; loudspeakers, mounted or not in their enclosures; headphones and earphones, combined or not with a microphone, and sets of a microphone and one or more loudspeakers; audio frequency and electric sound amplifiers and sets | 2 shipments |
| 852852 Monitors; other than cathode-ray tube; capable of directly connecting to and designed for use with an automatic data processing machine of heading 84.71 | 2 shipments |
| 853910 Lamps; sealed beam units | 2 shipments |
| 210420 Homogenised composite food preparations | 1 shipments |
| 251611.0 Granite, porphyry, basalt, sandstone, other monumental and building stone, whether or not roughly trimmed, cut, by sawing etc, into blocks or slabs of a rectangular (including square) shape | 1 shipments |
| 401693 Rubber; vulcanised (other than hard rubber), gaskets, washers and other seals, of non-cellular rubber | 1 shipments |
| 410799 Leather; further prepared after tanning or crusting, incl. parchment-dressed, of bovine (including buffalo) or equine animals, no hair, excluding leather of heading 41.14, and whole hides and skins, and sides, (full grains, unsplit and grain splits) | 1 shipments |
| 480256 Uncoated paper and paperboard (not 4801 or 4803); printing, writing or graphic, 10% or less by weight of mechanical or chemi-mechanical processed fibre, weight 40-150g/m2, in sheets 435mm or less by 297mm or less (unfolded) | 1 shipments |
| 490191.0 Printed books, brochures, leaflets and similar printed matter, whether or not in single sheets | 1 shipments |
| 520300 Cotton; carded or combed | 1 shipments |
| 591110 Textile fabric, felt & felt-lined woven fabrics, coated/covered/laminated with rubber, leather or other material, for card clothing, similar fabrics used for technical purposes, including rubber impregnated narrow velvet fabrics to cover weaving spindles | 1 shipments |
| 630710 Cloths; floor cloths, dish-cloths, dusters and similar cleaning cloths | 1 shipments |
| 700510 Glass; float glass and surface ground or polished glass, in sheets, non-wired, having an absorbent reflecting or non-reflecting layer | 1 shipments |
| 701331 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than of heading no. 7010 or 7018) | 1 shipments |
| 701939 Glass fibres; webs, mattresses, boards and similar non-woven products excluding mats and thin sheets | 1 shipments |
| 702000 Glass; articles n.e.c. in chapter 70 | 1 shipments |
| 730890 Iron or steel; structures and parts thereof, n.e.c. in heading 7308 | 1 shipments |
| 731181 Containers for compressed or liquefied gas, of iron or steel | 1 shipments |
| 731210 Iron or steel; stranded wire, ropes and cables, not electrically insulated | 1 shipments |
| 732909 | 1 shipments |
| 761799 | 1 shipments |
| 841290 Engines; parts, for engines and motors of heading no. 8412 | 1 shipments |
| 842820.0 Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426 or 8427 (e.g. lifts, escalators, conveyors, teleferics) | 1 shipments |
| 845230.0 Sewing machines; other than book-sewing machines of heading no. 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles | 1 shipments |
| 848360 Clutches and shaft couplings (including universal joints) | 1 shipments |
| 850153 Electric motors; AC motors, multi-phase, of an output exceeding 75kW | 1 shipments |
| 850519 Magnets; permanent magnets and articles intended to become permanent magnets after magnetisation, other than of metal | 1 shipments |
| 851240 Windscreen wipers, defrosters and demisters; electrical, of kinds used for cycles or motor vehicles | 1 shipments |
| 852692 Radio remote control apparatus | 1 shipments |
| 853340.0 Electrical resistors (including rheostats and potentiometers), excluding heating resistors | 1 shipments |
| 853669 Electrical apparatus; plugs and sockets, for a voltage not exceeding 1000 volts | 1 shipments |
| 853690 Electrical apparatus; n.e.c. in heading no. 8536, for switching or protecting electrical circuits, for a voltage not exceeding 1000 volts | 1 shipments |
| 853710.0 Boards, panels, consoles, desks, cabinets, bases with apparatus of heading no. 8535, 8536 for electricity control and distribution, (other than switching apparatus of heading no. 8517) | 1 shipments |
| 854091.0 Thermionic, cold cathode or photo-cathode valves and tubes (e.g. vacuum, vapour, gas filled valves and tubes, mercury arc rectifying valves and tubes, cathode-ray and television camera tubes) | 1 shipments |
| 854140 Electrical apparatus; photosensitive, including photovoltaic cells, whether or not assembled in modules or made up into panels, light-emitting diodes (LED) | 1 shipments |
| 854141 Diodes, transistors, similar semiconductor devices; including photovoltaic cells assembled or not in modules or panels, light-emitting diodes (LED), mounted piezo-electric crystals | 1 shipments |
| 854449 Insulated electric conductors; for a voltage not exceeding 1000 volts, not fitted with connectors | 1 shipments |
| 854470 Insulated electric conductors; optical fibre cables | 1 shipments |
| 854790.0 Insulating fittings; for electrical machines, appliances, equipment, excluding insulators of heading no. 8546, electrical conduit tubing and joints therefore | 1 shipments |
| 858580 | 1 shipments |
| 860290.0 Rail locomotives; (other than those of heading no. 8601), locomotive tenders | 1 shipments |
| 870911 Vehicles; electrical, self-propelled, (not fitted with lifting or handling equipment), of the type used for short distance transport of goods in factories, warehouses, dock areas or airports | 1 shipments |
| 900651 Cameras, photographic (excluding cinematographic); with a through-the-lens viewfinder, single lens reflex (SLR), for a roll film of a width not exceeding 35mm | 1 shipments |
| 900921 | 1 shipments |
| 901780 Mathematical instruments and equipment; n.e.c. in heading no. 9017 | 1 shipments |
| 901812 Medical, surgical instruments and appliances; ultrasonic scanning apparatus | 1 shipments |
| 903181 Measuring or checking instruments, appliances and machines, n.e.c. or included in this chapter; profile projectors | 1 shipments |
| 903190.0 Measuring or checking instruments, appliances and machines, n.e.c. or included in this chapter; profile projectors | 1 shipments |
| 920930 Musical instrument strings | 1 shipments |
| 940130.0 Seats (not those of heading no. 9402), whether or not convertible into beds and parts thereof | 1 shipments |
| 940330 Furniture; wooden, for office use | 1 shipments |
| 940389 Furniture; of cane, osier, or similar materials (other than bamboo or rattan) | 1 shipments |
| 960321 Brushes; toothbrushes | 1 shipments |
| Arrival Date | Bill Of Lading | Consignee | Weight | HS Code | Description |
|---|---|---|---|---|---|
| 2025-11-27 | EXDO6570113300 | CARL ZEISS INDUSTRIAL METROLOGY LL | 20.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINE HTS: |
| 2025-11-27 | EXDO6570115227 | CARL ZEISS INDUSTRIAL METROLOGY LL | 416.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINE HTS: |
| 2025-11-27 | EXDO6570115267 | CARL ZEISS INDUSTRIAL METROLOGY LL | 424.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINE HTS: COMPONENT FOR MEASURING MACHINE HTS: |
| 2025-11-27 | EXDO6570115302 | CARL ZEISS INDUSTRIAL METROLOGY LL | 150.0 kg | 520300.0 | GUIDE RAIL HTS: BELLOWS HTS: COVER BOTTOM HTS: |
| 2025-11-27 | EXDO6570115338 | CARL ZEISS INDUSTRIAL METROLOGY LL | 67.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINE HTS: |
| 2025-11-27 | EXDO6570115371 | CARL ZEISS INDUSTRIAL METROLOGY LL | 180.0 kg | 853340.0 | CONTROLLER CABINET HTS: |
| 2025-11-27 | EXDO6570115376 | CARL ZEISS INDUSTRIAL METROLOGY LL | 1377.0 kg | 520300.0 | PLUG TRAY HTS: COVER HTS: |
| 2025-11-27 | EXDO6570115380 | CARL ZEISS INDUSTRIAL METROLOGY LL | 3.0 kg | 870850.0 | DRIVE BAND HTS: |
| 2025-11-26 | ACLUSA01219934A | CARL ZEISS IMT CORP | 13242.0 kg | 902230.0 | CNC COORDINATE MEASURING MACHINE CMM PRISMO / / SERIAL NO. WITH ACCESSORIES HS-CODE QUANTITY KISTE X X CM / . KG KISTE X X CM / KG KARTON X X CM // KG KARTON X X CM / KG KARTON X X CM / KG KARTON X X CM / KG KISTE X X CM / KG KARTON X X CM / KG KISTE X X CM / KG KARTON X X CM / KG |
| 2025-11-26 | ACLUSA01219940A | CARL ZEISS INDUSTRIAL QUALITY | 7343.0 kg | 902230.0 | MEASURING MACHINE CT METROTOM KV SYSTEM SERIAL NO. WITH ACCESSORIES HS-CODE QUANTITY KISTE X X CM // . KGS KISTE X X CM // KGS KISTE X X CM // KGS FREIGHT PREPAID |
| 2025-11-21 | EXDO6570115062 | CARL ZEISS INDUSTRIAL METROLOGY LL | 46.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-21 | EXDO6570115158 | CARL ZEISS INDUSTRIAL METROLOGY LL | 2656.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-21 | EXDO6570115164 | CARL ZEISS INDUSTRIAL METROLOGY LL | 52.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-21 | EXDO6570115189 | CARL ZEISS INDUSTRIAL METROLOGY LL | 37.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-21 | EXDO6570115192 | CARL ZEISS INDUSTRIAL METROLOGY LL | 506.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-19 | ACLUSA01218523A | CARL ZEISS IMT CORP | 8753.0 kg | 902230.0 | MEASURING MACHINE CT METROTOM KV SYSTEM SERIAL-NO. WITH ACCESSORIES HS-CODE QUANTITY KISTE X X CM / KGS KARTON X X CM / KGS KISTE X X CM / KGS KISTE X X CM / KGS |
| 2025-11-15 | EXDO6570114910 | CARL ZEISS INDUSTRIAL METROLOGY LL | 139.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-15 | EXDO6570114934 | CARL ZEISS INDUSTRIAL METROLOGY LL | 25.0 kg | 851822.0 | ENCLOSURE FRONT HTS: |
| 2025-11-15 | EXDO6570114935 | CARL ZEISS INDUSTRIAL METROLOGY LL | 35.0 kg | 700719.0 | HOLDING PLATE HTS: TOUGHENED SAFETY GLAS HTS: |
| 2025-11-15 | EXDO6570114956 | CARL ZEISS INDUSTRIAL METROLOGY LL | 5.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-11-15 | EXDO6570114959 | CARL ZEISS INDUSTRIAL METROLOGY LL | 30.0 kg | 850240.0 | ROTARY TABLE HTS: |
| 2025-11-15 | EXDO6570115029 | CARL ZEISS INDUSTRIAL METROLOGY LL | 70.0 kg | 520300.0 | FACEPLATE FOR ROTARY TABLE FILTER PAD HTS: LATE HTS: BELLOWS HTS: GUIDANCE HTS: |
| 2025-11-06 | EXDO6570114810 | CARL ZEISS INDUSTRIAL METROLOGY LL | 25.0 kg | 844711.0 | BALANCE CYLINDER HTS: |
| 2025-11-06 | EXDO6570114882 | CARL ZEISS INDUSTRIAL METROLOGY LL | 112.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINE HTS: |
| 2025-11-06 | EXDO6570114885 | CARL ZEISS INDUSTRIAL METROLOGY LL | 637.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: |
| 2025-10-30 | EXDO6570114522 | MOOG INC | 8879.0 kg | 853710.0 | ROTARY TABLE BUFFER CONTROL PANEL HTS: |
| 2025-10-24 | EXDO6570114618 | CARL ZEISS INDUSTRIAL METROLOGY LL | 127.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHIENE HTS: COMPONENT FOR MEASURING MACHIENE HTS: COMPONENT FOR MEASURING MACHIENE HTS: |
| 2025-10-24 | EXDO6570114627 | CARL ZEISS INDUSTRIAL METROLOGY LL | 27.0 kg | 940130.0 | FRAME BELLOW HTS: |
| 2025-10-24 | EXDO6570114628 | CARL ZEISS INDUSTRIAL METROLOGY LL | 51.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHIENE HTS: COMPONENT FOR MEASURING MACHIENE HTS: COMPONENT FOR MEASURING MACHIENE HTS: |
| 2025-10-24 | EXDO6570114693 | CARL ZEISS INDUSTRIAL METROLOGY LL | 21.0 kg | 870850.0 | DRIVE HTS: |
| 2025-10-24 | EXDO6570114710 | CARL ZEISS INDUSTRIAL METROLOGY LL | 33.0 kg | 850240.0 | ROTARY TABLE HTS: |
| 2025-10-24 | EXDO6570114667 | CARL ZEISS INDUSTRIAL METROLOGY LL | 354.0 kg | 846694.0 | BASE FRAME HTS: |
| 2025-10-24 | EXDO6570114677 | CARL ZEISS INDUSTRIAL METROLOGY LL | 124.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINE HTS: COMPONENT FOR MEASURING MACHINE HTS: COMPONENT FOR MEASURING MACHINE HTS: COMPONENT FOR MEASURING MACHINE HTS: COMPONENT FOR MEASURING MACHINE HTS: |
| 2025-10-24 | EXDO6570114678 | CARL ZEISS INDUSTRIAL METROLOGY LL | 510.0 kg | 846694.0 | BASE FRAME HTS: |
| 2025-10-19 | SGLS509013037 | FOXCONN BAJA CALIFORNIA S A DE C V | 7431.0 kg | 903149.0 | CT METROTOM COORDINATE MEASURING MACHINE |
| 2025-10-16 | EXDO6570114514 | CARL ZEISS INDUSTRIAL METROLOGY LL | 90.0 kg | 520300.0 | BASE PLATE CARRIER-CONTROLLER HTS: FACEPLATE HTS: FACEPLATE HTS: |
| 2025-10-16 | EXDO6570114307 | CARL ZEISS INDUSTRIAL METROLOGY LL | 609.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MACHINES HTS: COMPONENT FOR MEASURING MAC |
| 2025-10-09 | EXDO6570114386 | CARL ZEISS INDUSTRIAL METROLOGY LL | 79.0 kg | 854091.0 | FRONT PANEL COMPLETE HTS: |
| 2025-10-08 | EXDO6570114226 | CARL ZEISS INDUSTRIAL METROLOGY LL | 984.0 kg | 903149.0 | MULTISENSOR COORDINATE MEASURING MACHINE HTS: |
| 2025-10-08 | EXDO6570114330 | CARL ZEISS INDUSTRIAL METROLOGY LL | 1557.0 kg | 903149.0 | MULTISENSOR COORDINATE MEASURING MACHINE HTS: |
| 2025-10-08 | EXDO6570114583 | CARL ZEISS INDUSTRIAL METROLOGY LL | 1557.0 kg | 550320.0 | COMPONENT FOR MEASURING MACHIENE HTS: |
| 2025-10-06 | ACLUSA01208221A | CARL ZEISS INDUSTRIAL QUALITY SOLUT | 15046.0 kg | 902230.0 | MEASURING MACHINE CMM PRISMO / / SERIAL NO. WITH ACCESSORIES HS-CODE CRATE X X CM / KGS CRATE X X CM / KGS CRATE X X CM / KGS CRATE X X CM / KGS CARTON X X CM / KG CARTON X X CM / KG CRATE X X CM / KG CARTON X X CM / KG CRATE X X CM / KG |
| 2025-10-03 | EXDO6570114180 | CARL ZEISS INDUSTRIAL METROLOGY LL | 86.0 kg | 520300.0 | COMPONENT FOR MEASURING MACHINES HTS: HTS: HTS: HTS: HTS: HTS: HTS: |
| 2025-10-03 | EXDO6570114196 | CARL ZEISS INDUSTRIAL METROLOGY LL | 9.0 kg | 844711.0 | BALANCE-CYLINDER HTS: |
| 2025-10-03 | EXDO6570114212 | CARL ZEISS INDUSTRIAL METROLOGY LL | 530.0 kg | 520300.0 | BASE FRAME HTS: HTS: |
| 2025-10-03 | EXDO6570114213 | CARL ZEISS INDUSTRIAL METROLOGY LL | 659.0 kg | 854790.0 | PNEUMATIC VIBRATION INSULATION HTS: |
| 2025-10-03 | EXDO6570113987 | CARL ZEISS INDUSTRIAL METROLOGY LL | 185.0 kg | 870850.0 | DRIVE HTS: |
| 2025-10-03 | EXDO6570114033 | CARL ZEISS INDUSTRIAL METROLOGY LL | 358.0 kg | 846694.0 | BASE FRAME HTS: |
| 2025-10-03 | EXDO6570114116 | CARL ZEISS INDUSTRIAL METROLOGY LL | 24.0 kg | 520300.0 | COMPONENT FOR MEASURING MACHINES HTS: HTS: |
| 2025-10-03 | EXDO6570114306 | CARL ZEISS INDUSTRIAL METROLOGY LL | 356.0 kg | 846694.0 | BASE FRAME HTS: |