| Shipment Reliability and Frequency | Volume of Goods |
|---|---|
| Avg. Shipments per Month: 12.42 | Average TEU per month: 18.96 |
| Active Months: 11 | Average TEU per Shipment: 1.53 |
| Shipment Frequency Std. Dev.: 6.76 |
| HS Code | Shipments |
|---|---|
| 848190 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves : Taps, cocks, valves and similar appliances; parts thereof | 43 shipments |
| 851490 Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss : Furnaces, ovens and heating equipment; parts of the industrial or laboratory equipment of heading no. 8514 | 25 shipments |
| 741521 Copper, nails, tacks, drawing pins, staples (not those of heading no. 8305) and the like, of copper or iron or steel with heads of copper; screws bolts, nuts, screws hooks, rivets, cotters, washers : Copper; washers, (including spring washers), not threaded | 11 shipments |
| 848190.0 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves | 8 shipments |
| 902139 Orthopaedic appliances; including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other which are worn, carried or implanted in the body to compensate for a defect or disability : Artificial parts of the body; excluding artificial joints | 7 shipments |
| 851490.0 Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss | 5 shipments |
| 831130 Wires, rods, tubes, plates, electrodes of base metal or metal carbides; of a kind used for soldering, brazing, welding; wires and rods for metal spraying : Rods and wire; coated rods and cored wire, of base metal, for soldering, brazing or welding by flame | 4 shipments |
| 848140 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves : Valves; safety or relief valves, for pipes, boiler shells, tanks, vats or the like | 4 shipments |
| 820411 Tools, hand; hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches), interchangeable spanner sockets, with or without handles : Tools, hand; hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches), non-adjustable | 3 shipments |
| 830130 Padlocks and locks (key, combination, electrically operated) of base metal; clasps and frames with clasps incorporating locks, of base metal, keys for any or the foregoing articles, of base metal : Locks; of a kind used for furniture (key, combination or electrically operated), of base metal | 3 shipments |
| 845430 Converters, ladles, ingot moulds and casting machines; of a kind used metallurgy or in metal foundries : Casting machines; of a kind used in metallurgy or in metal foundries | 3 shipments |
| 848790 Machinery parts; not containing electrical connectors, insulators, coils, contacts or other electrical features, n.e.c. in this chapter : Machinery parts; not containing electrical connectors, insulators, coils, contacts or other electrical features, n.e.c. in chapter 84, other than ships' or boats' propellers and blades therefor | 3 shipments |
| 392220 Sanitary ware; baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and sanitary ware, of plastics : Plastics; lavatory seats and covers | 2 shipments |
| 720421.0 Ferrous waste and scrap; remelting scrap ingots of iron or steel | 2 shipments |
| 741521.0 Copper, nails, tacks, drawing pins, staples (not those of heading no. 8305) and the like, of copper or iron or steel with heads of copper; screws bolts, nuts, screws hooks, rivets, cotters, washers | 2 shipments |
| 820411.0 Tools, hand; hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches), interchangeable spanner sockets, with or without handles | 2 shipments |
| 820713 Tools, interchangeable; for hand tools, whether or not power-operated, or for machine tools (pressing, stamping, punching, drilling etc), including dies for drawing or extruding metal, and rock drilling or earth boring tools : Tools, interchangeable; rock drilling or earth boring tools, with working part of cermets, whether or not power operated | 2 shipments |
| 841581 Air conditioning machines; comprising a motor driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated : Air conditioning machines; containing a motor driven fan, other than window or wall types, incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps) | 2 shipments |
| 870840 Motor vehicles; parts and accessories, of heading no. 8701 to 8705 : Vehicle parts; gear boxes and parts thereof | 2 shipments |
| 902230.0 X-ray, alpha, beta, gamma radiation apparatus; x-ray tubes, x-ray generators, high tension generators, control panels and desks, screens, examination or treatment tables, chairs and the like | 2 shipments |
| 820580 Tools, hand; (including glaziers' diamonds) n.e.c.; blow lamps; vices, clamps etc, other than accessories for and parts of, machine-tools or water-jet cutting machines; anvils; portable forges; hand or pedal operated grinding wheels with frameworks | 1 shipments |
| 820580.0 Tools, hand; (including glaziers' diamonds) n.e.c.; blow lamps; vices, clamps etc, other than accessories for and parts of, machine-tools or water-jet cutting machines; anvils; portable forges; hand or pedal operated grinding wheels with frameworks | 1 shipments |
| 830160.0 Padlocks and locks (key, combination, electrically operated) of base metal; clasps and frames with clasps incorporating locks, of base metal, keys for any or the foregoing articles, of base metal | 1 shipments |
| 831130.0 Wires, rods, tubes, plates, electrodes of base metal or metal carbides; of a kind used for soldering, brazing, welding; wires and rods for metal spraying | 1 shipments |
| 840690 Turbines; steam and other vapour turbines : Turbines; parts of steam and other vapour turbines | 1 shipments |
| 841111 Turbo-jets, turbo-propellers and other gas turbines : Turbo-jets; of a thrust not exceeding 25kN | 1 shipments |
| 841231.0 Engines and motors; n.e.c. (e.g. reaction engines, hydraulic power engines, pneumatic power engines) | 1 shipments |
| 841290 Engines and motors; n.e.c. (e.g. reaction engines, hydraulic power engines, pneumatic power engines) : Engines; parts, for engines and motors of heading no. 8412 | 1 shipments |
| 842230 Dish washing machines; machinery for cleaning, drying, filling, closing, sealing, capsuling or labelling bottles, cans, boxes, bags, etc, machinery for aerating beverages : Machinery; for filling, closing, sealing, capsuling or labelling bottles, cans, bags or other containers, machinery for aerating beverages | 1 shipments |
| 842890 Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426 or 8427 (e.g. lifts, escalators, conveyors, teleferics) : Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426, 8427 or 8428 | 1 shipments |
| 847439 Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores in solid form, shaping, moulding machinery for solid mineral fuels : Machines; for mixing or kneading mineral substances, excluding concrete mixers and machines for mixing mineral substances with bitumen | 1 shipments |
| 847940 Machinery and mechanical appliances; having individual functions, n.e.c. in this chapter : Machines; for making rope or cable | 1 shipments |
| 848110 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves : Valves; pressure reducing, for pipes, boiler shells, tanks, vats or the like | 1 shipments |
| 848180 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves : Taps, cocks, valves and similar appliances; for pipes, boiler shells, tanks, vats or the like, including thermostatically controlled valves | 1 shipments |
| 848180.0 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves | 1 shipments |
| 848330.0 Transmission shafts (including cam and crank) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers; flywheels and pulleys; clutches and shaft couplings | 1 shipments |
| 851010 Shavers, hair clippers and hair removing appliances, with self-contained electric motor : Shavers; with self-contained electric motor | 1 shipments |
| 854620 Electrical insulators of any material : Electrical insulators; of ceramics | 1 shipments |
| 870323 Motor cars and other motor vehicles; principally designed for the transport of persons (other than those of heading no. 8702), including station wagons and racing cars : Vehicles; with only spark-ignition internal combustion reciprocating piston engine, cylinder capacity over 1500 but not over 3000cc | 1 shipments |
| 880510 Aircraft launching gear, deck-arrestor or similar gear, ground flying trainers; parts of the foregoing articles : Aircraft launching gear, deck-arrestor or similar gear and parts thereof | 1 shipments |
| 902139.0 Orthopaedic appliances; including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other which are worn, carried or implanted in the body to compensate for a defect or disability | 1 shipments |
| 940190.0 Seats (not those of heading no. 9402), whether or not convertible into beds and parts thereof | 1 shipments |
| 960321 Brooms, brushes (including parts of machines), hand operated floor sweepers, mops and feather dusters; knots and tufts for broom or brush making; paint pads and rollers; squeegees : Brushes; toothbrushes | 1 shipments |
| Arrival Date | Bill Of Lading | Shipper | Weight | HS Code | Description |
|---|---|---|---|---|---|
| 2025-10-15 | DMALSHAI08736 | CHENGDU TIANCHENG PRECISION MACHINE | 1500.0 kg | 741521.0 | BODY & SPRING CASE |
| 2025-10-10 | DMALSHAI07963 | CHANGZHOU WECARE INTERNATIONAL TRADE | 718.0 kg | 820580.0 | BASE/COVER/PEDAL |
| 2025-10-02 | DMALMAAA55991 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1852.0 kg | 720421.0 | STAINLESS STEEL - ROUGH CASTINGS STAINLESS STEEL - ROUGH CASTINGS STAINLESS STEEL - ROUGH CASTINGS STAINLESS STEEL - ROUGH CASTINGS |
| 2025-10-02 | DMALMAAA56057 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 73.0 kg | 902230.0 | MATERIAL: T X |
| 2025-10-02 | DMALMAAA56056 | SRI RANGANATHAR VALVES PRIVATE LIMI | 2840.0 kg | 848190.0 | VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-10-02 | DMALMAAA56071 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 341.0 kg | 848190.0 | VALVE PARTS |
| 2025-09-26 | DMALMAAA55301 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 276.0 kg | 848190.0 | PARTS OF VALVE (WHOLLY MADE OF IRON) |
| 2025-09-26 | DMALMAAA55515 | SRI RANGANATHAR INDUSTRIES PRIVATE | 970.0 kg | 848190.0 | VALVE PARTS VALVE PARTS |
| 2025-09-18 | DMALMAAA55403 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 650.0 kg | 851490.0 | REG PARTS REG PARTS |
| 2025-09-18 | DMALMAAA55377 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 618.0 kg | 851490.0 | REG PARTS REG PARTS |
| 2025-09-17 | DMALSHAI02594 | QIAN SHENG INTERNATIONAL METAL COMP | 1853.0 kg | 820411.0 | END SECTION |
| 2025-09-17 | DMALSHAI01370 | HANGZHOU CHUNJIANG VALVE CORPORATIO | 1271.0 kg | 902139.0 | VALVE PARTS (BODY) |
| 2025-09-16 | DMALSZXD05927 | WENHUA MACHINERY TECHNOLOGY CO | 2122.0 kg | 830160.0 | BASE |
| 2025-09-16 | DMALSZXD03722 | TYCON ALLOY INDUSTRIES ZHONGSHAN CO | 963.0 kg | 902230.0 | ADAPTER X , OUTLET, RAISED FACE, ANSI FLAN GE |
| 2025-09-13 | DMALMAAA54902 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1074.0 kg | 848190.0 | VALVE PARTS VALVE BODY CASTING NPS CL V B |
| 2025-09-13 | DMALMAAA54904 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 281.0 kg | 851490.0 | REG PARTS |
| 2025-09-13 | DMALMAAA55138 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 172.0 kg | 851490.0 | REG PARTS |
| 2025-09-10 | DMALSHAH94619 | CHANGZHOU WECARE INTERNATIONAL TRADE | 2097.0 kg | 820411.0 | END HOSGPLATECOVER |
| 2025-09-10 | DMALSHAH96663 | WUHAN UNITED JENSON ELECTROMECHANIC | 3151.0 kg | 831130.0 | FLAME ARRESTER |
| 2025-09-05 | DMALMAAA54724 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1688.0 kg | 848190.0 | VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-09-05 | DMALMAAA54791 | G I AUTO PRIVATE LIMITED | 1195.0 kg | 841231.0 | # TIE ROD SPRING SIDE-B |
| 2025-09-05 | DMALMAAA54820 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 1057.0 kg | 848190.0 | VALVE PARTS VALVE PARTS |
| 2025-09-05 | DMALMAAA54862 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 1781.0 kg | 851490.0 | REG PARTS REG PARTS REG PARTS |
| 2025-09-05 | DMALMAAA54840 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 229.0 kg | 848330.0 | BEARING RET FLANGE N SIZE SIDE MTD HA NDJA |
| 2025-09-03 | DMALSHAH93454 | CHENGDU TIANCHENG PRECISION MACHINE | 914.0 kg | 741521.0 | BODY & SPRING CASE |
| 2025-09-01 | DSVFMIL0311866 | BIFFI ITALIA S R L | 20560.0 kg | 848180.0 | ACTUATORS ACTUATORS ACTUATORS ACTUATORS |
| 2025-08-27 | DMALMAAA54032 | SRI RANGANATHAR INDUSTRIES PRIVATE | 710.0 kg | 720421.0 | STAINLESS STEEL - ROUGH CASTINGS STAINLESS STEEL - ROUGH CASTINGS |
| 2025-08-27 | DMALMAAA54165 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 424.0 kg | 848190.0 | VALVE PARTS |
| 2025-08-27 | DMALMAAA54263 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 386.0 kg | 940190.0 | SEAT,LOWER SPRING, LESS PAINT |
| 2025-08-20 | DMALMAAA54526 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 2012.0 kg | 851490 | REG PARTS REG PARTS REG PARTS REG PARTS REG PARTS |
| 2025-08-20 | DMALMAAA54218 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1738.0 kg | 848190 | VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-08-20 | DMALMAAA54332 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 2643.0 kg | 851490 | REG PARTS REG PARTS REG PARTS REG PARTS REG PARTS REG PARTS REG PARTS |
| 2025-08-20 | DMALMAAA54408 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 948.0 kg | 851490 | REG PARTS REG PARTS |
| 2025-08-20 | DMALMAAA54637 | SRI RANGANATHAR VALVES PRIVATE LIMI | 5318.0 kg | 848140 | INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALVES-SPARE ITEMS INDUSTRIAL VALV |
| 2025-08-12 | DMALSHAH88613 | CHANGZHOU WECARE INTERNATIONAL TRADE | 488.0 kg | 392220 | COVER |
| 2025-08-12 | DMALSHAH88714 | CHENGDU TIANCHENG PRECISION MACHINE | 2001.0 kg | 741521 | BODY & SPRING CASE |
| 2025-08-06 | DMALMAAA53891 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1331.0 kg | 848190 | VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-07-30 | DMALMAAA52557 | SRI RANGANATHAR VALVES PRIVATE LIMI | 4970.0 kg | 848140 | INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES INDUSTRIAL VALVES IND |
| 2025-07-30 | DMALMAAA53560 | SRI RANGANATHAR INDUSTRIES PRIVATE | 962.0 kg | 848190 | VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-07-30 | DMALMAAA53543 | BLUEMOUNT CASTINGS PRIVATE LIMITED | 1128.0 kg | 848190 | VALVE PARTS VALVE PARTS |
| 2025-07-30 | DMALMAAA53529 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 2441.0 kg | 851490 | REG PARTS REG PARTS REG PARTS REG PARTS REG PARTS |
| 2025-07-30 | DMALMAAA53031 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 1189.0 kg | 848110 | PRESSURE REDUCING VALVES SPARE PRESSURE REDUCING VALVES SPARE PRESSURE REDUCING VALVES SPARE |
| 2025-07-30 | DMALMAAA53276 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1986.0 kg | 848190 | VALVE PARTS VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-07-30 | DMALMAAA53127 | EMERSON PROCESS MANAGEMENT CHENNAI PLOT | 1758.0 kg | 851490 | REG PARTS REG PARTS REG PARTS REG PARTS REG PARTS |
| 2025-07-13 | DMALSHAH78402 | CHENGDU TIANCHENG PRECISION MACHINE | 2881.0 kg | 741521 | BODY & SPRING CASE |
| 2025-07-09 | DMALMAAA52656 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1417.0 kg | 848190 | VALVE PARTS VALVE PARTS VALVE PARTS |
| 2025-07-09 | DMALMAAA53008 | SRI RANGANATHAR INDUSTRIES PRIVATE | 1155.0 kg | 902139 | VALVE BODY CASTING NPS 3 CL150 V150B VALVE BODY CASTING NPS 4 CL150V150B VALVE BODY CSTG NPS2 CL150 V150 |
| 2025-07-08 | DMALSHAH75552 | QIAN SHENG INTERNATIONAL METAL COMP | 1175.0 kg | 820411 | END SECTION |
| 2025-07-08 | DMALSHAH75740 | WUHAN UNITED JENSON ELECTROMECHANIC | 1823.0 kg | 831130 | FLAME ARRESTER |
| 2025-07-08 | DMALSHAH76344 | HANGZHOU CHUNJIANG VALVE CORPORATIO | 1239.0 kg | 902139 | VALVE PARTS (BODY) |