| Shipment Reliability and Frequency | Volume of Goods |
|---|---|
| Avg. Shipments per Month: 3.58 | Average TEU per month: 4.71 |
| Active Months: 12 | Average TEU per Shipment: 1.31 |
| Shipment Frequency Std. Dev.: 1.68 |
| HS Code | Shipments |
|---|---|
| 150810 Ground nut oil and its fractions; whether or not refined, but not chemically modified : Vegetable oils; ground-nut oil and its fractions, crude, not chemically modified | 16 shipments |
| 720410 Ferrous waste and scrap; remelting scrap ingots of iron or steel : Ferrous waste and scrap; of cast iron | 12 shipments |
| 370790 Chemical preparations for photographic uses (other than varnishes, glues, adhesives and similar preparations); unmixed products for photographic uses, put up in measured portions or for retail sale : Photographic goods; chemical preparations other than sensitised emulsions, put up in measured portions or put up for retail sale in a form ready for use | 10 shipments |
| 732183 Stoves, ranges, grates, cookers (those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances and parts, of iron or steel | 8 shipments |
| 930610 Bombs, grenades, torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition, projectiles and parts thereof, including shot and cartridge wads | 8 shipments |
| 870520 Special purpose motor vehicles; not those for the transport of persons or goods (e.g. breakdown lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units etc) : Vehicles; mobile drilling derricks | 7 shipments |
| 450390 Cork; articles of natural cork : Cork; articles of natural cork other than corks and stoppers | 6 shipments |
| 120710 Oil seeds and oleaginous fruits, n.e.c. in chapter 12; whether or not broken : Oil seeds; palm nuts and kernels, whether or not broken | 4 shipments |
| 121020 Hop cones, fresh or dried, whether or not ground, powdered or in the form of pellets; lupulin : Hop cones; ground, powdered or in the form of pellets; lupulin | 4 shipments |
| 841231 Engines and motors; n.e.c. (e.g. reaction engines, hydraulic power engines, pneumatic power engines) : Engines; pneumatic power engines and motors, linear acting (cylinders) | 3 shipments |
| 120710.0 Oil seeds and oleaginous fruits, n.e.c. in chapter 12; whether or not broken | 2 shipments |
| 150810.0 Ground nut oil and its fractions; whether or not refined, but not chemically modified | 2 shipments |
| 440200 Wood charcoal (including shell or nut charcoal), whether or not agglomerated | 2 shipments |
| 730721 Tube or pipe fittings (e.g. couplings, elbows, sleeves), of iron or steel : Steel, stainless; tube or pipe fittings, flanges, of stainless steel | 2 shipments |
| 961210.0 Typewriter, similar ribbons, inked, otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink pads, whether or not inked, with or without boxes | 2 shipments |
| 150500 Wool grease and fatty substances derived therefrom (including lanolin) : Wool grease and fatty substances derived therefrom (including lanolin) | 1 shipments |
| 391731 Tubes, pipes and hoses and fittings thereof (for example, joints, elbows, flanges), of plastics : Plastics; tubes, pipes and hoses thereof, flexible, having a minimum burst pressure of 27.6MPa | 1 shipments |
| 392220 Sanitary ware; baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and sanitary ware, of plastics : Plastics; lavatory seats and covers | 1 shipments |
| 410791 Leather further prepared after tanning or crusting, including parchment-dressed leather, of bovine (including buffalo) or equine animals, without hair on, whether or not split, other than leather of heading 41.14 : Leather; further prepared after tanning or crusting, including parchment-dressed, of bovine (including buffalo) or equine animals, without hair on, other than leather of heading 41.14, not whole hides and skins, but including sides, full grain, unsplit | 1 shipments |
| 440200.0 Wood charcoal (including shell or nut charcoal), whether or not agglomerated | 1 shipments |
| 540259 Synthetic filament yarn (other than sewing thread), not put up for retail sale, including synthetic monofilament of less than 67 decitex : Yarn, synthetic; filament, monofilament (less than 67 decitex), other than high tenacity or textured yarn, single, twisted more than 50 turns per metre, n.e.c. in heading no. 5402, not for retail sale, not sewing thread | 1 shipments |
| 722880 Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel : Steel, alloy or non-alloy; hollow drill bars and rods | 1 shipments |
| 730722.0 Tube or pipe fittings (e.g. couplings, elbows, sleeves), of iron or steel | 1 shipments |
| 761210 Aluminium casks, drums, cans, boxes etc (including rigid, collapsible tubular containers), for materials other than compressed, liquefied gas, 300l capacity or less, lined, heat-insulated or not : Aluminium; collapsible tubular containers, for any material, (not compressed or liquefied gas), 300l capacity or less, whether or not lined, not fitted with mechanical/thermal equipment | 1 shipments |
| 820713 Tools, interchangeable; for hand tools, whether or not power-operated, or for machine tools (pressing, stamping, punching, drilling etc), including dies for drawing or extruding metal, and rock drilling or earth boring tools : Tools, interchangeable; rock drilling or earth boring tools, with working part of cermets, whether or not power operated | 1 shipments |
| 830710 Tubing; flexible, with or without fittings, of base metal : Tubing; flexible, with or without fittings, of iron or steel | 1 shipments |
| 845819 Lathes for removing metal : Lathes; for removing metal, horizontal, other than numerically controlled | 1 shipments |
| 846692 Parts & accessories suited for use only/mainly with machines of headings 8456-8465, including work/tool holders, self-opening dieheads, dividing heads & other special attachments for the machines; tool holders for any type of tool for working in the hand : Parts & accessories suited for use solely/principally for the machines of heading no. 8465, n.e.c. in heading no. 8466 | 1 shipments |
| 852610 Radar apparatus, radio navigational aid apparatus and radio remote control apparatus : Radar apparatus | 1 shipments |
| 930610.0 Bombs, grenades, torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition, projectiles and parts thereof, including shot and cartridge wads | 1 shipments |
| 990146 | 1 shipments |
| Arrival Date | Bill Of Lading | Shipper | Weight | HS Code | Description |
|---|---|---|---|---|---|
| 2025-12-08 | PGCRHOU2510034 | SUSUN GROUP HK CO LTD | 1399.0 kg | 150810.0 | WING NUT COUPLER |
| 2025-12-04 | PGCRCHI2511001 | ORIENT INTL HOLDING SHANGHAI FOREIGN TRADE CO LTD | 7985.0 kg | 961210.0 | SHE-BOLT PLASTIC BULLET CAP TRUMPET ANCHOR PKGS= PLTS . |
| 2025-11-25 | PGCRNYC2510018 | NINGBO JINTAI FASTENER CO LTD | 615.0 kg | 120710.0 | NUTS . |
| 2025-11-24 | PGCRLAX2510044 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 50.0 kg | 961210.0 | PLASTIC BULLET PKGS= PLTS . |
| 2025-11-18 | PGCRCHI2510035 | JIANGSU SUSUN GROUP HK CO LTD | 1451.0 kg | 440200.0 | BEARING WASHER EXPANSION SHELL FULL LOAD COLLAR NUT WING NUT BEVEL WASHER CAST HEX NUT |
| 2025-11-12 | PGCRCHI2510017 | NINGBO JINTAI FASTENER CO LTD | 4650.0 kg | 120710.0 | NUTS . |
| 2025-10-23 | PGCRCHI2509052 | 7200.0 kg | 730722.0 | TAPER STEEL SETTING CONE TRUMPET ORING FOR A V PIPE . | |
| 2025-10-08 | PGCRHOU2508062 | SUSUN GROUP HK CO LTD | 699.0 kg | 150810.0 | WING NUT COLLAR NUT CAST HEX NUT |
| 2025-09-02 | PGCRCHI2508028 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 2096.0 kg | 930610.0 | SHE-BOLT TAPER . . |
| 2025-08-19 | PGCRCHI2507068 | NINGBO JINTAI FASTENER CO LTD | 5620.0 kg | 120710 | NUTS . |
| 2025-08-12 | PGCRCHI2507038 | JIANGSU SUSUN GROUP HK CO LTD | 14544.0 kg | 732183 | BEARING WASHER WEDGE WASHER EXPANSION SHELL COUPLER MACHINED WEDGE PLATE CAST WEDGE PLATE |
| 2025-08-10 | PGCRLAX2507039 | JIANGSU SUSUN GROUP HK CO LTD | 5656.0 kg | 450390 | HEX NUT COUPLER WEDGE WASHER BEARING WASHER PASS-THRU SHE-BOLT |
| 2025-08-07 | PGCRLAX2506073 | 125.0 kg | PE SPACER ENDCAP 5PKGS=1PLTS . . | ||
| 2025-07-29 | PGCRCHI2506088 | 17449.0 kg | 540259 | TAPER COUPLER TRANSITION CONE TRUMPET NYLON CAP TWISTED RING ANCHOR . | |
| 2025-07-26 | PGCRHOU2506060 | SUSUN GROUP HK CO LTD | 467.0 kg | 720410 | CAST HEX NUT BEVEL WASHER |
| 2025-07-11 | PGCRLAX2506059 | JIANGSU SUSUN GROUP HK CO LTD | 639.0 kg | 720410 | CAST HEX NUT CAST COUPLER BEVEL WASHER |
| 2025-06-30 | PGCRCHI2506036 | JIANGSU SUSUN GROUP HK CO LTD | 3157.0 kg | 150810 | HEX NUT CAST HEX NUT CAST LOCK NUT CAST WING NUT COUPLER |
| 2025-06-26 | PGCRLAX2505087 | JIANGSU SUSUN GROUP HK CO LTD | 905.0 kg | 730721 | MACHINED WEDGE PLATE |
| 2025-06-14 | PGCRHOU2505021 | SUSUN GROUP HK CO LTD | 647.0 kg | 150810 | CAST ANCHOR NUT HEX NUT BEVEL WASHER |
| 2025-06-13 | PGCRCHI2505032 | 189.0 kg | LOKCOUPLER . | ||
| 2025-06-04 | PGCRCHI2505030 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 135.0 kg | 121020 | PE TRANSITION CONE 7PKGS=1PLT . . |
| 2025-06-04 | PGCRCHI2505031 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 5036.0 kg | TAPER . . | |
| 2025-05-29 | PGCRLAX2504080 | JIANGSU SUSUN GROUP HK CO LTD | 3230.0 kg | 732183 | MACHINED WEDGE PLATE BEVEL WASHER BEARING WASHER CAST ANCHOT NUT CAST HEX NUT CAST WING NUT |
| 2025-05-28 | PGCRCHI2505020 | JIANGSU SUSUN GROUP HK CO LTD | 4236.0 kg | 150810 | CAST HEX NUT CAST WING NUT HEX NUT FULL LOAD COLLAR NUT CAST LOCK NUT CAST COUPLER BEVEL WASHER |
| 2025-05-11 | PGCRLAX2504054 | 645.0 kg | 370790 | PE SPACER PE TRUMPET COUPLER 11PKGS=3PLTS . . | |
| 2025-05-10 | PGCRLAX2503095 | JIANGSU SUSUN GROUP HK CO LTD | 1465.0 kg | 730721 | MACHINED WEDGE PLATE |
| 2025-05-08 | PGCRHOU2503096 | SUSUN GROUP HK CO LTD | 858.0 kg | 720410 | CAST HEX NUT COUPLER |
| 2025-05-06 | PGCRCHI2504053 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 15047.0 kg | 370790 | PLASTIC MEVA FORM TIE TAPER COUPLER 27PKGS=15PLTS . |
| 2025-04-21 | PGCRCHI2503097 | JIANGSU SUSUN GROUP HK CO LTD | 2280.0 kg | 440200 | PASS-THRU SHE-BOLT CAST HEX NUT COUPLER EXPANSION SHELL |
| 2025-04-13 | PGCRLAX2503026 | JIANGSU SUSUN GROUP HK CO LTD | 14708.0 kg | 990146 | COMMODITY CODE ( FAK 990146 ) CAST WEDGE PLATE CAST HEX NUT TAPERED COUPLER BEVEL WASHER |
| 2025-04-01 | PGCRCHI2503047 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 9605.0 kg | TAPER . . | |
| 2025-03-27 | PGCRLAX2502034 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 390.0 kg | PE SPACER 19PKGS=1PLTS . . | |
| 2025-03-20 | PGCRCHI2502037 | JIANGSU SUSUN GROUP HK CO LTD | 1844.0 kg | 930610 | PASS-THRU SHE-BOLT |
| 2025-03-20 | PGCRCHI2502036 | ORIENT INTERNATIONAL HOLDING SHA FOREIGN TRADE CO LTD | 2618.0 kg | 121020 | TAPER COUPLER EURO CONE MEVA FORM TIE CONE GROUT SLEEVE . |
| 2025-03-11 | PGCRCHI2502022 | JIANGSU SUSUN GROUP HK CO LTD | 1617.0 kg | 720410 | CAST COUPLER HEX NUT |
| 2025-03-04 | PGCRHOU2501048 | 775.0 kg | 121020 | STEEL SETTING CONE . | |
| 2025-02-13 | PGCRCHI2501054 | ORIENT INTL HOLDING SHANGHAI FO FOREIGN TRADE CO LTD | 170.0 kg | 150500 | GROUT SLEEVE GREASE CAP 6PKGS=1PLT . . |
| 2025-02-06 | PGCRCHI2501046 | JIANGSU SUSUN GROUP HK CO LTD | 1920.0 kg | 720410 | CAST COUPLER |
| 2025-01-30 | PGCRCHI2412051 | JIANGSU SUSUN GROUP HK CO LTD | 5624.0 kg | 720410 | CAST HEX NUT CAST ANCHOR NUT FULL LOAD COLLARNUT(FULL LOAD COLLARR NUT) CAST COUPLER TAPE RED COUPLER |
| 2025-01-28 | PGCRCHI2501013 | JIANGSU SUSUN GROUP HK CO LTD | 4073.0 kg | 370790 | CAST COUPLER TAPERED COUPLER FULL LOAD COLLARNUT HEX NUT BEVEL WASHER |
| 2025-01-28 | PGCRCHI2501009 | ORIENT INTERNATIONAL HOLDING SHA FOREIGN TRADE CO LTD | 8508.0 kg | 930610 | SHE-BOLT COUPLER BAR CAP PE TRUMPET 14PKGS=10PLTS . |
| 2025-01-16 | PGCRLAX2412045 | ORIENT INTL HOLDING SHANGHAI FO FOREIGN TRADE CO LTD | 200.0 kg | 392220 | PLASTIC ENDCAP PLASTIC BULLET 7PKGS=2PLTS . . |
| 2025-01-12 | PGCRHOU2411053 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 554.0 kg | 930610 | SHE-BOLT . |
| 2024-12-07 | PGCRLAX2411027 | JIANGSU SUSUN GROUP HK CO LTD | 1964.0 kg | 720410 | CAST COUPLER TAPERED COUPLER FULL LOAD COLLARNUT CAST WING NUT |
| 2024-12-07 | PGCRCHI2411026 | ORIENT INTERNATIONAL HOLDING SHANGH FOREIGN TRADE CO LT | 13593.0 kg | 930610 | SHE-BOLT NUT TWISTED RING ANCHOR EURO CONE TAPER . |
| 2024-12-02 | PGCRHOU2410043 | SUSUN GROUP HK CO LTD | 160.0 kg | 720410 | CAST WING NUT |
| 2024-11-27 | PGCRCHI2410066 | JIANGSU SUSUN GROUP HK CO LTD | 2229.0 kg | 440200 | CAST LOCK NUT CAST ANCHOR NUT CAST HEX NUT CAST WING NUT FULL LOAD COLLAR NUT BEVEL WASHEREXPANSION SHELL PASS-THRU SHE-BOLT |
| 2024-11-27 | PGCRCHI2410053 | ORIENT INTL HOLDING SHANGHAI FO FOREIGN TRADE CO LTD | 4435.0 kg | 150810 | TAPER NUT . . |
| 2024-10-21 | PGCRCHI2409068 | ORIENT INTL HOLDING SHANGHAI FO FOREIGN TRADE CO LTD | 269.0 kg | LOKCOUPLER . . | |
| 2024-10-16 | PGCRLAX2409045 | JIANGSU SUSUN GROUP HK CO LTD | 3566.0 kg | 732183 | MACHINED WEDGE PLATE BEVEL WASHER WING NUT CAST COUPLER |